Numerical 3D Model of a Novel Photoelectrolysis Tandem Cell with Solid Electrolyte for Green Hydrogen Production

Abstract

The only strategy for reducing fossil fuel-based energy sources is to increase the use of sustainable ones. Among renewable energy sources, solar energy can significantly contribute to a sustainable energy future, but its discontinuous nature requires a large storage capacity. Due to its ability to be produced from primary energy sources and transformed, without greenhouse gas emissions, into mechanical, thermal, and electrical energy, emitting only water as a by-product, hydrogen is an effective carrier and means of energy storage. Technologies for hydrogen production from methane, methanol, hydrocarbons, and water electrolysis using non-renewable electrical power generate CO2. Conversely, employing photoelectrochemistry to harvest hydrogen is a sustainable technique for sunlight-direct energy storage. Research on photoelectrolysis is addressed to materials, prototypes, and simulation studies. From the latter point of view, models have mainly been implemented for aqueous-electrolyte cells, with only one semiconductor-based electrode and a metal-based counter electrode. In this study, a novel cell architecture was numerically modelled. A numerical model of a tandem cell with anode and cathode based on metal oxide semiconductors and a polymeric membrane as an electrolyte was implemented and investigated. Numerical results of 11% solar to hydrogen conversion demonstrate the feasibility of the proposed novel concept.

Keywords

• photoelectrochemical tandem cell
• hydrogen production
• hematite photoanode
• numerical model
• solid electrolyte membrane
• metal oxide semiconductor