Investigations on the Cosputtered ITO-ZnO Transparent Electrode Ohmic Contacts to n-GaN

Abstract

Transparent indium tin oxide (ITO) and cosputtered ITO-zinc oxide (ZnO) films’ contacts to an n-GaN epilayer were investigated. Both of these electrodes’ contact to the n-GaN epilayer showed Schottky behavior, although the contact resistance of the ITO-ZnO/n-GaN system was lower than that of the ITO/n-GaN system. By placing a thin Ti interlayer between the ITO-ZnO/n-GaN interface, nonalloyed ohmic contact was achieved. The inset Ti interlayer was both beneficial both for enhancing the outdiffusion of the nitrogen atoms at the surface of the n-GaN and suppressing the indiffusion of oxygen atoms from the surface of the ITO-ZnO to n-GaN. The figure-of-merit (FOM), evaluated from the specific contact resistance and optical property of the Ti/ITO-ZnO system’s contact to the n-GaN epilayer, was optimized further at an adequate thickness of the Ti interlayer.

Keywords

• cosputtered ITO-ZnO
• n-GaN
• transparent electrode
• Ti interlayer
• ohmic contact
• figure-of-merit