Materials Research Express (Jan 2023)
Realization of high performance PZN-PT single crystal based piezoelectric flexural mode hydrophone for underwater sensor applications
Abstract
In this article, attempts are made to grow large size PZN-PT single crystals using high temperature solution growth method by implementing novel bottom cooling technique. The grown crystals are oriented and poled along 〈001〉 direction and obtained larger piezoelectric strain coefficient (d _33 > 2000 pm V ^−1 ) suitable for development of underwater acoustic sensor requirements. Flexural mode hydrophone is realized using the oriented PZN-PT single crystal discs. Finite element modeling is employed to examine the design of the flexural mode hydrophone and an equivalent circuit model is also applied to study its acoustic characteristic at two extreme boundary conditions like simply supported and clamped edge condition. The underwater acoustic response of the PZN-PT single crystal based flexural mode hydrophone is evaluated over the frequency range (100 Hz to 12 kHz) and its responses are compared with the FEM and equivalent circuit model results. The predicted results from FEM and equivalent circuit model are found to be in good agreement with the experimental results. The receiving sensitivity of the PZN-PT single crystal-based hydrophone is 12 dB higher than the PZT 5A based hydrophone in the frequency range of 2 kHz to 6 kHz. The fabricated PZN-PT single crystal-based hydrophone offers better performance than the conventional piezo ceramic based flexural hydrophone.
Keywords