Targeted inertization with flue gas injection in fully mechanized caving gob for residual coal spontaneous combustion prevention with CFD modeling

Abstract

Abstract To effectively prevent and control the spontaneous combustion of residual coal at the bottom of a large fully mechanized gob space, we proposed a targeted inertization technology based on the injection of power plant flue gas. Based on the real onsite conditions of the gob, the three‐dimensional distributions of the overburden fractures, gas emission, and residual coal were added to the multiphysics coupled model of spontaneous coal combustion. The simulation method based on moving coordinates was used to complete the risk evaluation and the locating of the spontaneous combustion in the fully mechanized gob, and the key control factors of the inerted zone and the fire prevention effect of the flue gas injection were analyzed. The results showed that the mismatch between the inerted zone and the spontaneous combustion risk zone was the root cause of the poor fire prevention effect of the inert gas injection. Because the density of the flue gas was greater than that of the leaked air, the flue gas mainly migrated and diffused in the lower part of the gob. At a distance of 100 m from the working face, the flue gas with 3%‐9% oxygen content injected at a rate of 2000 m3/h completely covered the high‐temperature residual coal. This caused the maximum temperature (Tmax) to drop from 334.2 K upon nitrogen injection to below 310 K. Additionally, the effect of the oxygen content fluctuation on Tmax was controlled within 2.6 K. The methods and the results in this study can serve as a reference for efficiently preventing and controlling local spontaneous combustion hazards in large spaces for underground coal mining.

Keywords

• gob area
• multiphysics coupling
• safety engineering
• spontaneous combustion
• targeted inertization