Geotechnical Behaviour of Fly Ash–Bentonite Used in Layers

Abstract

Increasing infrastructure growth has forced the construction industry to look for wasteful, cheap, and suitable materials for construction. An investigation into the geotechnical utilization of fly ash was carried out in the present study. Practical applications normally involve the use of large quantities of fly ash, so proper mixing of the fly ash with other materials may not be significantly achieved. Therefore, the present paper investigates the behaviour of a fly ash–bentonite layered system with different ratios. The physical properties and chemical composition of fly ash and bentonite were determined. SEM and energy dispersive X-ray experiments were also used to investigate the morphology and phase compositions of fly ash and bentonite. A series of consolidated undrained (CU) triaxial tests on fly ash–bentonite were carried out to investigate shear strength characteristics. Fly ash (F) and bentonite (B) were used in the following ratios: 1:1 (50% F:50% B), 2:1 (67% F:33% B), 3:1 (75% F:25% B), and 4:1 (80% F:20% B), with different numbers of interfaces (N), i.e., 1, 2, and 3 for each ratio. The deviator stress and cohesion value were found to increase with the number of interfaces for each ratio. The angle of shear resistance changed marginally with the increase in the fly ash–bentonite ratios and varying interfaces.

Keywords

• fly ash
• bentonite
• shear strength
• waste
• triaxial tests
• chemical