Addition of kraft lignin of Eucalyptus sp. on the properties of the lignin-phenol-formaldehyde adhesive

Abstract

ABSTRACT: The objective of this research was to extract lignin from Eucalyptus sp. kraft black liquor and to evaluate the influence of its addition on the properties of the lignin-phenol-formaldehyde adhesive. The adhesives were synthesized at different phenol mass percentages by lignin, called lignin-phenol-formaldehyde adhesives in the proportions of 25, 30, 50, 75 and 80%. The parameters evaluated in the adhesives were pH, total solid content, organic compound content, inorganic compound content, gelatinization time and adhesive behavior in the glue line. The pH ranged from 10.63 to 11.65. For the total solid content was found the value of 53 to 69 %. The contents of organic compounds ranged from 51 to 75% and inorganic from 25 to 49%. It was observed that with the addition of macromolecule in the adhesive formulation, the total and organic solid content was reduced proportionally while the inorganic solid was high. The gelatinization time was reduced due to the addition of lignin. The lower proportions of addition presented better penetration and fluidity in interface with the wood. The kraft lignin extracted from eucalyptus kraft black liquor is a great adhesive with potential to partially replace petroleum-derived phenol, with great potential for use and application in the aeronautical and automotive sectors, in the bonding process of structural parts.

Keywords

• black liquor
• timber industry
• phenolic resin