Clinical Ophthalmology (Jun 2022)

Measurement of Phacoemulsification Vacuum Pressure in the Oertli CataRhex3

  • Peterson JS,
  • Cooper C,
  • Ungricht EL,
  • Mamalis C,
  • Barlow W,
  • Zaugg B,
  • Bernhisel AA,
  • Olson RJ,
  • Pettey JH

Journal volume & issue
Vol. Volume 16
pp. 1731 – 1737

Abstract

Read online

John S Peterson,1,2 Caitlynn Cooper,1,2 Emilie L Ungricht,1,2 Christina Mamalis,1 William Barlow,1 Brian Zaugg,1 Ashlie A Bernhisel,1 Randall J Olson,1 Jeff H Pettey1 1Department of Ophthalmology and Visual Sciences, John A. Moran Eye Center, University of Utah, Salt Lake City, UT, 84132, USA; 2University of Utah School of Medicine, Salt Lake City, UT, 84132, USACorrespondence: Jeff H Pettey, Department of Ophthalmology and Visual Sciences, John A. Moran Eye Center, University of Utah, 65 Mario Capecchi Drive, Salt Lake City, UT, 84132, USA, Tel +1 801 581 2352, Fax +1 801 581 3357, Email [email protected]: To determine the actual vacuum pressure generated by the Oertli CataRhex 3® (Oertli), using an external measuring system.Methods: The effective vacuum pressure created by the Oertli was measured with a pressure device that was continuous with the vacuum tubing system while closed to the external environment. Measurements were taken with the machine set to 300 and 500 mmHg at flow rates of 20, 35, and 50 mL/min and at bottle heights of 60, 80, and 100 cm. Pressures were recorded after the foot pedal was depressed to vacuum setting (second position), and the pressure was allowed to stabilize. Subsequently, it was compared to the pressure value displayed by the machine.Results: Externally measured vacuum pressure was on average 13.02% greater (39.05 mmHg) than displayed vacuum pressure at 300 mmHg (P < 0.005) and 8.60% greater (42.98 mmHg) than displayed vacuum at 500 mmHg (P < 0.005). The average difference between displayed and measured pressure increased with increasing bottle heights.Conclusion: On average, the vacuum pressure generated in the Oertli was found to be significantly higher than the machine’s reading when the machine was set at 300 mmHg and 500 mmHg. Adjusting vacuum had variable effects on the measured versus displayed pressure readings.Keywords: phacoemulsification, Oertli CataRhex 3, vacuum pressure, bottle height, flow rate

Keywords