Theoretical and experimental studies on the fabrication of cylindrical-electrode-assisted solution blowing spinning nanofibers

Abstract

Cylindrical-electrode-assisted solution blowing spinning (CSBS) is a novel technique of fabricating nanofibers. In this paper, a combination of numerical simulation, theoretical analysis, and experiment is used to study the influences of CSBS airflow field and electric field on the fabrication of CSBS nanofibers for the first time. The effects of air pressure and injection speed on the morphology of CSBS fiber are studied. The research results show that the increase in air pressure will increase the centerline velocity and the centerline turbulence intensity within the effective stretching distance of the airflow. The increase in centerline velocity will result in a decrease in the diameter of CSBS fibers. There is a negative correlation between jet diameter and surface charge density of CSBS jet. The increase in air pressure will increase the stretching of the jet by the air flow, which will make the jet more likely to become thinner again because of the charge repulsion. Increasing air pressure will reduce the porosity of the nonwoven. As the injection speed increases, the diameter of CSBS fiber increases, and the porosity of the nonwoven decreases first and then increases. This work provides theoretical and experimental bases for the controllable preparation of CSBS nanofibers.

Keywords

• cylindrical-electrode-assisted solution blowing spinning
• nanofibers
• effective stretching distance
• surface charge density
• morphology