Numerical investigation of the impact of thermoelectric effect on electron beam welding of dissimilar materials

Abstract

Electron beam welding of GH4169 and Ni is required in the manufacture of the regenerative cooling system of the liquid rocket motor. The thermoelectric effect is observed during the welding of dissimilar metals; however, there has been a lack of investigation into the influence of this effect on electron beam welding joint formation and its dependence on test plate thickness. The thermoelectric effect of electron beam welding between GH4169 and Ni with varying thicknesses, as well as the influence of induced magnetic fields on electron beam trajectories, are investigated through the establishment of a numerical model incorporating thermal-electric-magnetic coupling.The results show that when the test plate increases from 2.5 mm to 10 mm the peak current density increases from 5.1 × 106 A/m2 to 7.6 × 106 A/m2, and the maximum magnetic flux density increases from 1.49× 10−2 T to 1.77 × 10−2 T. The increase in magnetic flux density results in a greater displacement of the electron beam spot away from the interface between the two materials, thereby causing incomplete fusion defects in the joints. This study elucidates the fundamental physical principles underlying the occurrence of incomplete fusion defects in electron beam welding joints, thereby furnishing essential theoretical underpinnings for enhancing the quality of dissimilar metal electron beam weld joints.

Keywords

• Electron beam welding
• GH4169
• Ni
• Thermoelectric effect
• Magnetic field