Experimental investigation of dehumidification and regeneration of zeolite coated energy exchanger

Abstract

Zeolite desiccant particles are well known for their strong affinity to adsorb water vapor molecules; however, they require significant regeneration energy to be created. This paper presents an experimental study of the adsorption and regeneration processes of a monolayer zeolite for indoor dehumidification to the 13X zeolite beads with a 4 × 8 mesh bead size and a pore opening 10 A⁰ were used as this monolayer. An experimental investigation was conducted to determine the effects of the relative humidity, temperature, and air flow rate on the adsorption and regeneration processes. The results show the effectiveness of the monolayer coating method and the relative humidity significantly affects the adsorption process, and that the airflow rate surrounding and through the zeolite beads increases the adsorption and desorption of the water vapor molecules. In the absence of the meniscus radius formation due to the monolayer arrangement prevents external condensation. With an airflow rate of Re = 1773, the full adsorption process at a relative humidity of 99% was obtained within 37 min; meanwhile, the regeneration process proceeded at 100 °C within 66 min. The adsorption time was reduced by 27% and 43% as the Reynold number increases to 2586 and 3325, respectively. Likewise, the effectiveness of the regeneration time is decreased by 0.07% and 14% within the same Reynold number increases. Results obtained from this research can be used to guide the future development of polymer-coated energy exchangers.

Keywords

• Adsorption
• Regeneration
• Zeolite 13X
• Monolayer coating
• Experimental investigation
• Meniscus radius