Usage of Microencapsulated Phase-Change Materials to Improve the Insulating Parameters of the Walls of Refrigerated Trailers

Abstract

Climate change is forcing action to reduce energy consumption and greenhouse gas emissions. An extremely important area of high-polluting energy consumption is material transport and, within this, the transport of chilled goods, including deep-frozen goods, is an important contributor. Phase change materials (PCMs) can have an important role in reducing energy consumption for the transport of chilled goods, but the current state of knowledge is not sufficient to bring the solution into popular use. This article includes a study of the effect of implementing microencapsulated PCM (mPCM) in polyurethane foam (PU) on the insulation performance of refrigerated trailer walls in low-temperature transport. In this research, mPCM was used, characterised by a phase-change heat in the range of 170–195 kJkg and a phase change temperature in the range from −10 °C to −9 °C. The studies performed show the potential of using mPCMs to improve the insulation performance of the walls of refrigerated trailers. Containing mPCM in the amount of 5.0% wt. placed throughout the entire volume of the wall can improve thermal conductivity of the wall for up to 15% in peak and 4.5% (0.2792 Wm2K without mPCM and 0.2665 Wm2K with mPCM) in the phase change temperature range. Out of the range of phase change temperatures, the thermal conductivity of the wall with mPCM is worse for 2.72% than in walls without PCM. Problems that need to be tackled were also identified, before the solution can be put into everyday use, i.e., finding the technology to increase the proportion of mPCMs relative to PU.

Keywords

• refrigerated trailer
• phase change materials (PCMs)
• PU foams
• latent heat storage
• thermal energy storage
• cold storage