Petrographic and Geotechnical Features of Dir Volcanics as Dimension Stone, Upper Dir, North Pakistan

Abstract

The utilization of dimension stone in construction has been prevalent since ancient times; however, its application in modern construction has gained significant attention over the last few decades. This research aimed to assess the physical and strength properties of volcanic rocks from the Kohistan Island Arc for their potential use as dimension stone. Five types of andesites (MMA, PMA-1, PMA-2, CMA, and FMA) and two types of agglomerates (AG-1 and AG-2) were identified based on their composition, color, and texture. The samples were characterized in terms of their petrography (compositional and textural), physical properties (specific gravity, water absorption, and porosity), and strength properties (unconfined compressive strength and unconfined tensile strength). Two non-destructive tests (ultrasonic pulse velocity test and Schmidt hammer) were conducted, and the degree of polishing was evaluated. Correlation analyses were carried out to establish possible relationships among these parameters. The presence of chlorite, epidote, sericite, and recrystallized quartz indicated signs of low-grade metamorphism in andesites. The study revealed that feldspar, amphibole, and quartz imparted good physical and strength properties to samples MMA, CMA, FMA, AG1, and AG2. On the other hand, PMA-1 and PMA-2 exhibited reduced physical and strength properties due to the abundance of alteration products like chlorite, sericite, and epidote. The unconfined compressive strength exhibited a strong correlation with ultrasonic pulse velocity, skeletal density, porosity, and water absorption. Weathering grade considerably affected the values of ultrasonic pulse velocity and Schmidt hammer. Consequently, samples PMA-1 and PMA-2 are not recommended for load-bearing masonry units and outdoor applications due to their high water absorption and low strength values. On the other hand, samples FMA and MMA exhibited excellent properties like high strength and good polishing, indicating their potential use as decorative and facing stones, external pavement, ashlar, rubbles, and load-bearing masonry units.

Keywords

• dimension stone
• volcanic rocks
• physical properties
• strength properties
• petrography
• non-destructive testing