Volume reduction of water samples to increase sensitivity for radioassay of lead contamination

Abstract

Abstract The World Health Organisation (WHO) presents an upper limit for lead in drinking water of 10 parts per billion ppb. Typically, to reach this level of sensitivity, expensive metrology is required. To increase the sensitivity range of low-cost devices, this paper explores the prospects of using a volume reduction technique of a boiled water sample doped with Lead-210 ( $${}^{210}$$ 210 Pb), as a means to increase the solute’s concentration. $${}^{210}$$ 210 Pb is a radioactive lead isotope and its concentration in a water sample can be measured with e.g. High Purity Germanium (HPGe) detectors at the Boulby Underground Germanium Suite. Concentrations close to the WHO limit have not been examined. This paper presents a measurement of the volume reduction technique retaining $$99\pm (9)$$ 99 ± ( 9 ) % of $${}^{210}$$ 210 Pb starting from a concentration of $$1.9 \times 10^{-6}$$ 1.9 × 10 - 6 ppb before reduction and resulting in $$2.63 \times 10^{-4}$$ 2.63 × 10 - 4 ppb after reduction. This work also applies the volume reduction technique to London tap water and reports the radioassay results from gamma counting in HPGe detectors. Among other radio-isotopes, $${}^{40}$$ 40 K, $${}^{210}$$ 210 Pb, $${}^{131}$$ 131 I and $${}^{177}$$ 177 Lu were identified at measured concentrations of $$2.83 \times 10^{3}$$ 2.83 × 10 3 ppb, $$2.55 \times 10^{-7}$$ 2.55 × 10 - 7 ppb, $$5.06 \times 10^{-10}$$ 5.06 × 10 - 10 ppb and $$5.84 \times 10^{-10}$$ 5.84 × 10 - 10 ppb in the London tap water sample. This technique retained $${90 \pm 50}{\%}$$ 90 ± 50 % of $${}^{40}$$ 40 K. Stable lead was inferred from the same water sample at a measured concentration of 0.012 ppb, prior to reduction.

Keywords

• Lead-210
• Lead in drinking water
• World Health Organisation
• Radioassay
• Volume Reduction