Toughening of ZrB2-based composites with in-situ synthesized ZrC from ZrO2 and graphite precursors

Abstract

ZrB2 matrix composites toughened with in-situ formed ZrC were fabricated by spark plasma sintering (SPS) utilizing ZrB2/ZrO2/graphite powder mixtures at 1900 °C for 7 min under 40 MPa load. Different amounts of graphite nano-flakes (3, 6, and 9 wt%) were added to ZrB2–20 vol% ZrO2 aiming in-situ formation of ZrC reinforcement. Clean ZrB2/ZrC interfaces were observed in the as-sintered microstructure, especially in the composite containing 6 wt% graphite. The reduction of ZrO2 with graphite, which formed ZrC, was progressed over a zirconium oxycarbide (ZrCxOy) intermediate. The hardness of the SPSed ZrB2-based composites was decreased with increasing the graphite content. However, the fracture toughness of the composites showed a reverse trend. By adjusting the graphite content to 6 wt%, excellent control of microstructure could be achieved for the prepared composites with a higher amount of ZrC and lower content of other unfavorable phases. It was finally found that achieving the optimum microstructure of the composite could improve its mechanical performance, and provides a hardness of 17.3 GPa and fracture toughness of 5.0 MPa m1/2.

Keywords

• Ultrahigh temperature ceramics
• Spark plasma sintering
• In-situ reinforcing
• Zirconium oxycarbide
• Toughening