Polymers (Oct 2021)
Laser-Induced Microstructuring of Polymers in Gaseous, Liquid and Supercritical Media
Abstract
New results are presented for laser formation—in particular, the “drawing” of microstructures in polymer films using continuous-wave (CW) laser radiation λ = 405 nm with an intensity of 0.8–3.7 kW/cm2. The laser drawing was carried out in the polymer system poly-2,2′-p-oxydiphenylene-5,5′-bis-benzimidazole (OPBI), which consists of two phases: a solid polymer matrix with formic acid (HCOOH) dissolved in it. The formation of microstructures, including the stage of foaming, was carried out in three media: air, water and a supercritical carbon dioxide medium containing dissolved molecules of the silver precursor Ag(hfac)COD. The morphological features of foam-like track structures formed in the near-surface layer of the polymer films by laser “drawing” are considered. A model of processes is presented that explains the appearance of periodic structures. The key point of this model is that it considers the participation of the photoinduced mechanism of explosive boiling of formic acid molecules dissolved in the polymer matrix. Using Raman spectroscopy, spectra were obtained and interpreted, which relate to different stages in the formation of microstructures in OPBI films. The effects associated with the peculiarities of luminescent microstructures on the surfaces of glasses in close contact with polymer films during laser “painting” in the air have been studied.
Keywords