Development of a Rotary Damper Integrated with Magnetorheological Bearings toward Extremely High Torque–Volume Ratio

Shengfeng Zhu; Ning Gong; Jian Yang; Shiwu Zhang; Xinglong Gong; Weihua Li; Shuaishuai Sun

doi:10.3390/machines11030368

Machines (Mar 2023)

Development of a Rotary Damper Integrated with Magnetorheological Bearings toward Extremely High Torque–Volume Ratio

Shengfeng Zhu,
Ning Gong,
Jian Yang,
Shiwu Zhang,
Xinglong Gong,
Weihua Li,
Shuaishuai Sun

Affiliations

Shengfeng Zhu: CAS Key Laboratory of Mechanical Behavior and Design of Materials, Department of Precision Machinery and Precision Instrumentation, University of Science and Technology of China, Hefei 230026, China
Ning Gong: CAS Key Laboratory of Mechanical Behavior and Design of Materials, Department of Precision Machinery and Precision Instrumentation, University of Science and Technology of China, Hefei 230026, China
Jian Yang: School of Electrical Engineering and Automation, Anhui University, Hefei 230039, China
Shiwu Zhang: CAS Key Laboratory of Mechanical Behavior and Design of Materials, Department of Precision Machinery and Precision Instrumentation, University of Science and Technology of China, Hefei 230026, China
Xinglong Gong: CAS Key Laboratory of Mechanical Behavior and Design of Materials, Department of Modern Mechanics, University of Science and Technology of China, Hefei 230026, China
Weihua Li: School of Mechanical, Materials, Mechatronic, and Biomedical Engineering, University of Wollongong, Wollongong, NSW 2522, Australia
Shuaishuai Sun: CAS Key Laboratory of Mechanical Behavior and Design of Materials, Department of Precision Machinery and Precision Instrumentation, University of Science and Technology of China, Hefei 230026, China

DOI: https://doi.org/10.3390/machines11030368
Journal volume & issue: Vol. 11, no. 3
p. 368

Abstract

Read online

Magnetorheological (MR) technology has provided effective solutions to many engineering bottleneck problems due to its controllable nature. However, designing a rotary MR damper with a high torque–volume ratio is always challenging, especially for some specific application scenarios with constrained space, such as robot joints. To solve this problem, a rotary damper based on MR bearings was designed and evaluated in this study. In this rotary damper, two MR bearings are utilized to provide controllable damping torques and serve as rotors, which greatly saves space while providing high torque. This feature grants the characteristics of compact design and high torque–volume ratio. Quasistatic testing shows that the damping torque of this rotary damper can reach 2.92 Nm when the applied current is 1.2 A. It achieves a high torque–volume ratio of 190 kN/m2, which is nearly four times higher than that of existing rotary MR dampers. The experimental results show that the proposed MR damper is effective in satisfying the high torque requirement in a limited space.

Published in Machines

ISSN: 2075-1702 (Online)
Publisher: MDPI AG
Country of publisher: Switzerland
LCC subjects: Technology: Mechanical engineering and machinery
Website: http://www.mdpi.com/journal/machines

About the journal

Abstract

Keywords