MEROS Dust Quality of Different Plants and Its Potential Further Uses

Abstract

Sintering is a process of agglomeration of fine particles into porous sinters for blast furnaces. During the sintering process, high volumes of sinter plant gas containing high loads of dust, SO2 and NOX and toxic pollutants, such as heavy metals (e.g., Hg, Pb, Cr and Cd) and PCDD/F, are emitted. The objective of this study was to characterize dusts of different plants as the basis for suggestions of reutilization and treatment options. Dusts, eluates and residues were produced and DOC, T-N, ions and heavy metals were analyzed. The results show that dusts from different plants are very similar in terms of DOC, T-N, Mg, Ca and many heavy metals and only differ in criteria such as suspended solids and ions such as K, Na, Cl and SO4. Based on the high levels of alkalis and low levels of iron, direct recycling into the sinter or furnace process is not recommended. The dissolution of the soluble substances in water reduces the MEROS dust by 90% of the weight and extracts the alkalis. The remaining wastewater needs to be treated to reduce DOC, T-N and some heavy metals. The solid residues can be recycled into the sinter to reduce potential PCDD/F, which are attached to the activated carbon.

Keywords

• sinter plant
• MEROS dust
• reutilization