Effect of Adding Waste Polyethylene and GGBFS on the Engineering Properties of Cement Mortar

Abstract

The recycling of waste materials has become an important topic worldwide. Wastes can be effectively used in concrete to improve its characteristics. This study aimed to research cement mortar’s physical properties, mechanical properties, and durability. In a cement mortar with a fixed water-to-binder ratio (W/B) of 0.5, waste polyethylene (PE) was added at sand volume ratios of 0%, 1%, 2%, 3%, and 4%. Cement was replaced with 0%, 10%, and 20% ground granulated blast furnace slag (GGBFS). The results showed that the slump and flow of mortar tended to decline as the added amount of waste PE increased, but they also increased with the increased replaced amount of GGBFS. The setting time of mortar was shortened as the waste PE increased but delayed as the amount of GGBFS increased. In terms of mechanical properties, the compressive strength of mortar declined as the replaced amount of waste PE increased. Using the GGBFS to replace part of the cement can improve the later mortar strength. This study found that when the added waste PE was within 2% and the replacement amount of GGBFS was 10%, the goal of recycling waste was reached most effectively, while maintaining the concrete’s mechanical properties.

Keywords

• recycling of waste materials
• polyethylene
• ground granulated blast furnace slag
• mechanical properties