Deposition of Water and Emulsion Hollow Droplets on Hydrophilic and Hydrophobic Surfaces

Abstract

The deposition of spray droplets is a hot topic in the field of plant protection. The air-induction nozzle, which is commonly used in agricultural spray, can produce droplets containing bubbles. However, few studies have addressed the deposition of hollow droplets. In the present study, we used experimental and numerical methods to investigate the deposition of hollow droplets. Three kinds of liquid—water, oil-based emulsion and organosilicon—were used to produce hollow droplets, and the diameter of droplets varied from 3 to 4.5 mm. Both hydrophilic and hydrophobic surfaces were selected as deposition targets. The results show that the deposition of hollow droplets can generate a central jet, which is similar to the Wortington jet. High deposition velocity and the large bubble volume were responsible for the large attainable height of the central jet. On the hydrophilic surface, for water hollow droplets with Weber number (We) ranging from 350 to 391, the central jet began to break up as the bubble fraction of the hollow droplet reached 0.15. Based on the numerical results, it was found that the internal pressure difference between the bottom liquid and the air cavity leads to the formation of the central jet. The bubble volume and impact velocity were both positively correlated with the internal pressure difference. The oil-based emulsion promoted the adherence of the hollow droplet by lubricating the hydrophobic surface. The oil-based emulsion hollow droplets shifted from rebounding to adhering on the hydrophobic surface as the emulsion concentration reached 0.4%.

Keywords

• hollow droplet
• central jet
• droplet deposition
• hydrophilic and hydrophobic surface
• CFD
• oil-based emulsion