Algorithm for Appropriate Design of Hydroelectric Turbines as Replacements for Pressure Reduction Valves in Water Distribution Systems

Abstract

Gravity flow water distribution systems (WDSs) are used to permit water flow from an input point of highest elevation (source) to the terminal points of a system (consumers). In such WDSs, typically, there is no need for external power to maintain the flow due to the typical high gradients that exist. However, those gradients cause high water velocity and pressure to some network areas that could potentially lead to pipes bursting. Currently, the only means to regulate pressure within allowable range are Pressure Reduction Valves (PRVs). They are installed at various locations, but they cannot utilize the existing hydropower potential in terms of electrical energy production. This paper provides a methodology for hydro-turbines dimensioning, so that they mimic PRV operation in terms of pressure regulation while producing power efficiently. This includes an algorithmic process within which the proper turbine design and performance prediction are initially determined, and then, via an interconnection between EPANET and MATLAB, the hydraulic behavior of their operation within the water network is modeled and simulated. The methodology has been tested with simulations of a typical urban WDS. The results indicate that the produced turbine geometries mimic PRV action at the respective locations with more than 1% accuracy during 70% of the time (2% maximum error), while producing electric energy with hydraulic efficiency over 60%.

Keywords

• water distribution systems
• hydro-turbine design
• pressure reduction valves
• hydraulic simulation
• pressure management
• energy recovery