Nondestructive Measurement of Emissivity of Damaged Parts of Coatings

Abstract

Low Infrared emissivity coating (LIREC) is prone to generating some problems such as bulges, degumming, and abrasion. In order to study whether the performance of LIREC under different damages can meet the work needs, it is essential to timely measure and evaluate the performance state of LIREC in the application process. The existing methods for measuring the damage of LIREC have some disadvantages such as expensive equipment, complex operation, and inaccurate measurement results. In this paper, a measurement method of LIREC damage capability based on thermal imager is proposed. The radiation temperature is measured by thermal imager, the real temperature and ambient temperature of coating surface are measured by thermocouple, and the emittance of coating surface is calculated. Non-contact and continuous large-area emissivity measurements are carried out on the damaged parts of the coating and verified by experiments. The measurement results show that the different damage types and damage degrees directly affect the measurement results of LIREC. Wear damage increases the emissivity of the coating while debonding damage basically does not change the coating emissivity. Shedding damage of small diameter forms voids, which causes the increase of the damage parts of emittance. In addition, bulge damage impedes temperature transfer and reduces emissivity. This method can timely and accurately measure and evaluate the performance state of LIREC and can provide a new idea for the accurate measurement of damage emissivity of LIREC.

Keywords

• infrared thermal imager
• coating damage
• emissivity measurement
• surface temperature field