Clinical, Cosmetic and Investigational Dentistry (Sep 2022)
Silanizing Effectiveness on the Bond Strength of Aged Bulk-Fill Composite Repaired After Sandblasting or Bur Abrasion Treatments: An in vitro Study
Abstract
Huda Hashim, Manal Hussain Abd-alla Department of Conservative Dentistry, College of Dentistry, Mustansiriyah University, Baghdad, IraqCorrespondence: Huda Hashim, Department of Conservative Dentistry, College of Dentistry, Mustansiriyah University, Baghdad, Iraq, Tel +9647717485368, Email [email protected]: To measure the repair shear bond strength (SBS) of an aged bulk-fill composite after different mechanical (diamond bur vs sandblasting) and chemical (universal adhesive with or without a previous silanization) surface treatments.Materials and Methods: Bulk-fill composite (Filtek One Bulk Fill, 3M ESPE) was used to construct seventy-two specimens aged through 10,000 thermal cycles. The specimens were allocated into two groups (n = 36 each) according to the mechanical roughening: Db, treated with a diamond bur, and Sb, treated by sandblasting. Each group was further subdivided into three subgroups (n = 12 each) according to the chemical conditioning: Db-only and Sb-only, unconditioned specimens; Db-U and Sb-U, specimens were conditioned with silane-containing universal adhesive (Scotchbond Universal adhesive, 3M ESPE); and Db-S-U and Sb-S-U, specimens were conditioned with a silane agent (Prosil, FGM) before employing the universal adhesive. The same composite material was used for repair. An additional reference group was constructed to measure the cohesive strengths of the bulk-fill composite. SBS testing was performed using a universal testing machine at a crosshead speed of 1 mm/min, and the failure modes were evaluated by stereomicroscope. The surface topography of resin composite after roughening was assessed by scanning electron microscopy. SBS data were statistically analyzed by ANOVA, Tukey’s test and independent t-test.Results: The significantly highest SBS was recorded in the reference group (P ≤ 0.05). Sb-only obtained significantly higher SBS than Db-only (P 0.05).Conclusion: The sandblasted specimens demonstrated a higher repair SBS than the diamond bur-treated specimens. The use of an additional silanizing step before applying silane-containing universal adhesive did not enhance the SBS of the repaired composite.Keywords: repair, bulk-fill composite, shear bond strength, silane, surface treatment, universal adhesive
