Influence of Urban Road Green Belts on Pedestrian-Level Wind in Height-Asymmetric Street Canyons

Abstract

This study was conducted to examine the effect on airflow of the shape of an urban road green belt in an asymmetrical street canyon. In this paper, the airflow field at pedestrian height in an asymmetrical street with different building height ratios (ASF) on both sides of the street is modeled and simulated using computational fluid dynamics (CFD) software, ANSYS FLUENT, and the flow rate characteristic distribution index and the average airflow intensity index are used to evaluate and analyze the airflow at the pedestrian level. The study shows that: (1) in an empty street scheme with different building ratios, the static wind area is located on the roof of the downstream building; the closer to the ground in a street with an ASF = 1/3, the lower the airflow rate. However, the situation is the opposite of that in other streets (2/3, 3/1, and 3/2). (2) The position of the green belt makes the windward side flow rate in the step-up street higher than that of the leeward side, and the flow rate of the leeward side in the step-down street is higher than that of the windward side. (3) Compared with other green belt forms, the use of two plates and three belts in the incremental street can increase the circumferential sinking at the roofs of the windward side of the street, thereby improving the wind environment in the entire street. The use of one plate, two-belt and three-plate, four-belt scenarios in the step-down street allows the two ends of the corner vortex to carry more airflow into the interior of the street and reduces both the “wind shadow effect” area in the middle of the street and the “air outlet effect” at both ends.

Keywords

• landscape architecture
• CFD
• asymmetric street canyons
• road green belt
• pedestrian-level wind