Fiber reinforced alkali-activated stone wool composites fabricated by hot-pressing technique

Abstract

Cementitious composite that has short molding time and high mechanical performance is favorable in pre-cast concrete industry. In this context, this study reports the use of hot-pressing technique to fabricate PVA fiber reinforced composites using alkali-activated stone wool (a waste from building insulation). Eight different mixtures were developed by varying the pressing time and temperature in comparison to the conventional oven-cured alkali-activated material. The mechanical performance of all compositions was evaluated under bending and compressive loadings. Life cycle assessment was used to investigate the greenhouse gas emission and embodied energy of the developed composites. The results reveal that PVA fibers greatly enhanced the mechanical performance of all reinforced mixtures with deflection hardening behavior and improvement in compressive strength. The hot-pressing technique lowered CO2 emission and saved energy. Finally, a multi-criteria ranking method suggests hot-pressed PVA fiber reinforced cementitious composite, manufactured at 120 °C for 2 h, is the best composition attaining balance among energy spent, mechanical properties, and CO2 footprint. Keywords: Hot-pressing, Alkali-activated material, High performance cementitious composite, Mineral wool, Recycling