Hydrothermal Desorption of Cs with Oxalic Acid from Hydrobiotite and Wastewater Treatment by Chemical Precipitation

Abstract

A hydrobiotite (HBT) clay contains more cesium (Cs)-specific adsorption sites than illitic clay, and the capacity of frayed edge sites can increase as the weathering of micaceous minerals proceeds. Thus, Cs can be selectively adsorbed to HBT clay. In this study, we investigated the removal efficiency of non-radioactive (133Cs) and radioactive (137Cs) Cs from HBT, using oxalic acid. We found the minimum optimal concentration of 0.15 M oxalic acid removed more than 90% of Cs. Subsequently, cations and Cs ions were removed using Ca(OH)2 and sodium tetraphenylborate (NaTPB) to treat the washing wastewater generated at the optimum concentration of the desorbent (0.15 M oxalic acid). In order to remove cations and heavy metal ions in the waste solution, Ca(OH)2 was treated at a mass ratio of 0.025 g/mL and pH 9–10 to derive optimal conditions. As a final step, to remove Cs, NaTPB was treated with a mass ratio of 2 mg/mL and reduced to below 0.1 mg/L Cs to find the optimal dose. The novelty of this study is that the amount of radioactive waste can be drastically reduced by removing the non-radioactive cations and heavy metals separately in the first step and removing the remaining radioactive Cs in the second step.

Keywords

• hydrobiotite (HBT)
• oxalic acid
• cesium
• chemical precipitation
• wastewater treatment