Development of a Simultaneous Process of Surface Modification and Pd Nanoparticle Immobilization of a Polymer Substrate Using Radiation

Abstract

Pd nanoparticles were immobilized on an acrylonitrile–butadiene–styrene copolymer (ABS) substrate using ionizing radiation. The samples were prepared by irradiating plastic zipper packs containing ABS substrates and a Pd(NO3)2 aqueous solution with a high-energy electron beam (4.8 MeV). Pd nanoparticles immobilized on the ABS substrate surfaces were observed using scanning electron microscopy (SEM). The chemical state of Pd was found to be coordinated to a carbonyl group or a metallic state by X-ray photoelectron spectroscopy (XPS) measurements. The peel strength of the Cu film on the Pd/ABS samples was 0.7 N/mm or higher. This result shows that the prepared Pd/ABS samples have high adhesion strength, despite not undergoing treatments such as etching with chromic acid. This method is expected to immobilize metal nanoparticles, not only on plastic plates but also on various other materials.

Keywords

• radiation
• Pd nanoparticles
• adhesion strength