Study on the Contact Parameter Calibration of the Maize Kernel Polyhedral Discrete Element Model

Abstract

During maize production and transportation, maize kernels frequently interact with mechanical components. To accurately simulate the interaction process between maize and mechanical components, it is essential to establish a reliable maize kernel model and input precise contact parameters. This study established polyhedral discrete element models of different maize kernels and calibrated the contact parameters between maize kernels and steel plates using the inclined plane method. The coefficients of restitution, static friction, and dynamic friction between maize and steel sheets were measured to be 0.5, 0.545, and 0.213, respectively. Subsequently, the contact parameters between maize kernels were determined through steepest climb tests and central composite design response surface tests. Then, the above parameters were optimized using Design-Expert software. The coefficients of restitution, static friction, and dynamic friction between maize kernels were measured to be 0.318, 0.182, and 0.232, respectively. Finally, the optimized parameters were validated using the angle of repose experiment, which found that the relative error between the experiment and the simulation was only 1.24%. The results indicated that the obtained contact parameters were accurate and reliable.

Keywords

• maize kernels
• polyhedron
• discrete element method
• parameter calibration