Shape-Memory Property Acting as a Switch to Change the Surface Property of the Film

Abstract

Shape-memory polyester films having functional groups were prepared and further grafted onto poly(N-isopropylacrylamide) (PNIPAAm) via atom-transfer radical polymerization. The grafting point of PNIPAAm was controlled by changing the composition of good and poor solvents. In the case of graft polymerization using only good solvents, the film swells, and polymerization proceeds not only from the surface but also from the internal polymerization initiation points. By increasing the proportion of poor solvents, PNIPAAm was grafted onto the surface of the film without swelling. The samples grafted to the interior regions of the film exhibited a decrease in the shape-memory recovery rate and recovery speed, whereas the samples grafted only to the surface of the film exhibited high shape-memory properties. Furthermore, contact-angle measurements revealed that the surface-grafted polymer exhibited changes in surface properties in response to film deformation. Because the deformation of the film is a large change, on the order of several millimeters, the deformation of the manually stretched film was shown to control molecular-level changes on the surface.

Keywords

• graft polymerization
• ring-opening polymerization
• shape-memory
• reactive surface
• polycaprolactone
• <i>N</i>-isopropylacrylamide