Heliyon (Aug 2024)

Numerical simulation of CO2-ECBM for deep coal reservoir with strong stress sensitivity

  • Shengli Gong,
  • Lu Zhang,
  • Tongyao Zhang,
  • Wei He,
  • Weiqiang Hu,
  • Hongchao Yin,
  • Liangshuai Ma,
  • Xin Hong,
  • Wei Zhang,
  • Bo Zhang

Journal volume & issue
Vol. 10, no. 15
p. e34818

Abstract

Read online

CH4 production rate of coalbed methane (CBM) well decreases rapidly during primary recovery in the deeply buried coal seam, resulting in a lot of CH4 residues. CO2 pour into deep coal seam with high stress sensitivity is available for enhancing CH4 recovery by improving permeability for reservoir fracture and displacing CH4 adsorbed in matrix. A coupled adsorp-hydro-thermo-mechanical (AHTM) model for deep methane development is established by considering the coupling relationships of non-isothermal and non-constant pressure competitive adsorption between CO2 and CH4, multi-phase flow, unsteady diffusion, heat transmission and in-situ stress variety. The model is verified by historical production and then used for CO2 enhanced CBM (CO2-ECBM) of deep coal reservoir in a sedimentary basin in Northwest China. The simulation results show that: (1) For primary recovery, permeability in coal reservoir drops rapidly with the development of CBM, which seriously restricts the production of CH4. The permeability of the reservoir decreases from 7.89 × 10−16 m2 to less than 1.50 × 10−16 m2, CH4 production rate in CBM well reduces to below 2000 m3/d, and the average total CH4 content of coal reservoir is reduced by 5.49 m3/t with the decrease of only 1.12 m3/t of average adsorbed CH4 in a production duration of 2000 d (2) With 10 MPa CO2 continuous injection into coal seam after 700d of primary, the permeability for reservoir and CH4 production rate increase while the total CH4 content and adsorption CH4 content in reservoir decrease compared with the primary recovery. (3) CO2 pouring into coal reservoir increases the CH4 production time and rate, which improves CH4 recovery of coal reservoir. And it increases by 23.36 %, 23.07 % and 22.46 % with shut-in thresholds of CH4 production rate of 1000 m3/d, 800 m3/d and 600 m3/d, respectively. The investigation is of great significance for the development of deep coalbed methane.

Keywords