Case Studies in Construction Materials (Jul 2024)

Deterioration performance analysis of recycled brick concrete subjected to freezing and thawing effect

  • Yongcheng Ji,
  • Zhiyang Pei,
  • Wenyuan Xu,
  • Zechuang Li,
  • Yiming Li,
  • Yanmin Jia

Journal volume & issue
Vol. 20
p. e02722

Abstract

Read online

This study employed experimental and finite element modeling approaches to systematically investigate the mechanical damage mechanisms of recycled brick aggregate concrete (RAC) under freeze-thaw cycling conditions. The investigation encompassed analyses at three hierarchical levels: macroscopic, mesoscopic, and microscopic. The influence of recycled brick aggregate (RA) replacement rate and the number of freeze-thaw cycles on RAC's apparent state and mechanical performance was examined at the macroscopic level. Utilizing equipment such as electron microscopes, a comprehensive observation was conducted from mesoscopic and microscopic perspectives to elucidate the evolving patterns of the cementitious matrix, RA, and the interfacial transition zone (ITZ) within RAC during the freeze-thaw cycling process. On the one hand, more excellent internal space was inherent in RA compared to NA, enabling it to effectively accommodate the volumetric expansion resulting from water freezing. It contributed to mitigating the damage to concrete caused by freeze-thaw cycles. On the other hand, RA's rough and porous characteristics facilitated the infiltration of cement particles into its internal structure, forming a robust ITZ with RA. Concurrently, a numerical simulation of RAC's freeze-thaw cycling process was presented. This simulation generated coupled damage maps and load-deflection curves for RAC under various conditions, encompassing different levels of RA replacement rates, freeze-thaw cycle counts, and loading modes. The research results indicated that the inclusion of RA adversely affects the mechanical properties of concrete while concurrently altering the concrete's failure mode and the propagation pathways of internal cracks. Nevertheless, it was worth noting that the introduction of RA, despite diminishing the mechanical performance of concrete, effectively mitigates the rate of performance degradation during the freeze-thaw cycling process. A favorable equilibrium between freeze-thaw resistance and mechanical performance could be achieved when the replacement rate of RA for natural aggregates (NA) fell within the range of 10–30 %. By employing a finite element model to simulate the flexural performance of RAC after freeze-thaw cycles, the deviation range between the simulated and measured values fell within the range of 5.00–8.23 %. This affirmed the model's fitting solid capability and validated its effectiveness in analyzing the RAC structure's freeze-thaw-load coupled damage and lifespan prediction.

Keywords