Generation of Polyamide 12 Coatings on Stainless Steel Substrates by Directed Energy Deposition with a Thulium-Doped Fiber Laser (DED-LB/P)

Abstract

Due to their good material properties (e.g., corrosion and wear resistance, biocompatibility), thermoplastic materials like polyamide 12 (PA12) are interesting for functional coatings on metallic components. To ensure a spatially resolved coating and to shorten the process chain, directed energy deposition of polymer powders by means of a laser beam (DED-LB/P) offers a promising approach. Due to characteristic absorption bands, the use of a thulium fiber laser with a wavelength of 1.94 μm is investigated in a DED-LB/P setup to generate PA12 coatings on stainless steel substrates without the need to add any absorbing additives. The influence of the energy density and powder mass flow was analyzed by infrared thermography. Furthermore, the coatings were characterized by differential scanning calorimetry, laser-scanning-microscopy, optical microscopy and cross-cutting tests. The results in this study demonstrate for the first time the basic feasibility of an absorber-free DED-LB/P process by using a thulium fiber laser. PA12 coatings with a low porosity and good adhesion are achievable. Depending on the application-specific requirements, a trade-off must be made between the density and surface quality of the PA12 coatings. The use of infrared thermography is appropriate for in-situ detection of process instabilities caused by an excessive energy input.

Keywords

• DED
• directed energy deposition
• laser polymer deposition
• PA12
• thulium fiber laser
• polymer coating