The Influence of Dew Retting on the Mechanical Properties of Single Flax Fibers Measured Using Micromechanical and Nanomechanical Approaches

Abstract

The mechanical properties of single flax fibers are characterized here as a function of dew retting. The fibers are measured using micromechanical and nanomechanical techniques over a large retting period (91 days). Damage-free single flax fibers in various stages of dew retting were manually extracted from retted flax plant stems. The flexural modulus and strength of the flax fibers were determined using micromechanical methods. The effective modulus of the outer surface of the single fibers was measured using AFM-based nanoindentation. The micromechanical methods revealed that the flexural modulus and strength of the manually extracted single fibers does not vary significantly as the retting progresses. The micromechanical methods revealed two distinct values of flexural strength in the fibers attributed to different failure modes. The values of these strengths do not vary significantly with retting or over-retting. The nanomechanical methods revealed that the effective modulus of the outer surface of the single fibers does evolve with retting. The physical/chemical origin of these observations remains to be established and could be the objective of future work.

Keywords

• flax fibers
• dew retting
• mechanical properties
• static and dynamic micromechanics
• AFM-based nanoindentation
• atomic force microscopy (AFM)