BioResources (Mar 2023)
Method for Studying Water Removal and Air Penetration during Through Air Drying of Tissue in Laboratory Scale
Abstract
Energy use, together with consumption of raw materials, machine clothing, and wet end chemicals, are some of the most critical aspects in successful tissue making today. This work was aimed at developing a laboratory-scale method of estimating dewatering mechanisms, vacuum efficiency, and energy use of Through Air Drying (TAD) of tissue. When compared to pilot data, the results of the new laboratory method for investigating dewatering during TAD were in the same magnitude, around 24 to 26% dryness after vacuum dewatering, and 27 to 29% dryness after TAD molding. Sheet properties, such as caliper and surface profile, were evaluated and compared to commercial tissue sheets. The results indicate that it will be possible to precisely measure accurate dryness development and penetrated air volume for tissue sheet forming and TAD molding at a laboratory scale. This can contribute to the efforts of implementing a circular forest-based bioeconomy by increasing the fundamental understanding of dewatering of tissue paper materials, which is facilitated by improvements in energy use. The new method developed in this work will make it easier to assess ideas that are difficult to bring to pilot scale or full scale before learning more of the dewatering capabilities. The authors are convinced that improved knowledge of tissue dewatering mechanisms, forming, and material transport during and after TAD dewatering can increase the efficiency of the industrial manufacturing processes.
