Archives of Metallurgy and Materials (Dec 2023)

Bonding Properties of TiAlCrSiN Coating / WC-8Co Cemented Carbide with Microtextured Surface

  • ManFeng Gong,
  • GuangFa Liu,
  • Meng Li,
  • XiaoQun Xia,
  • Lei Wang,
  • JianFeng Wu,
  • ShanHua Zhang,
  • Fang Mei

DOI
https://doi.org/10.24425/amm.2023.146223
Journal volume & issue
Vol. vol. 68, no. No 4
pp. 1563 – 1570

Abstract

Read online

WC-8Co cemented carbide was prepared by a high-temperature liquid phase sintering in argon at 5-200 Pa. Three microtextured grooves with a spacing of 500, 750, and 1000 μm were prepared on the surface of WC-8Co cemented carbide. TiAlCrSiN multi-element hard coating was deposited on the WC-8Co cemented carbide microtextured surface with multi-arc ion plating technology. The Vickers hardness and fracture toughness of coated and uncoated WC-8Co cemented carbide with or without a microtextured surface were investigated. The effect of different microtextured spacing on the interface bonding strength of the TiAlCrSiN coating was analyzed. The results show that with the reduction of the microtextured spacing, the Vickers hardness of the cemented carbide slightly decreases, and the fracture toughness slightly increases. The microtextured surface can improve the interface bonding strength between the coating and the substrate. The smaller the microtextured spacing, the larger the specific surface area and the higher the surface energy, so the interface bonding strength between the coating and the substrate increases.

Keywords