Three-Dimensional Physical and Numerical Modelling of Fracturing and Deformation Behaviour of Mining-Induced Rock Slopes

Abstract

Fracturing behaviour of jointed rock mass subjected to mining can significantly affect the stability of the rock structures and rock slopes. Ore mining within an open-pit final slope would lead to large-scale strata and surface movement of the rock slope. Rock mass structure, or more specifically, the strength, spacing and distribution of rock joints, are the controlling factors that govern the failure and deformation mechanisms of the final slope. Two-dimensional (2-D) physical modelling tests have been conducted in the literature, but in general, most of them have simplified the geological conditions and neglected some key features of rock mass structure in the field. In this study, new three-dimensional (3-D) physical modelling methods are introduced, with realistic modelling of mechanical behaviour of rock mass as well as identified properties of predominant rock joint sets. A case study of Yanqianshan iron mine is considered and the corresponding 1:200 model rock slope was created for studying the rock joint effects on the strata movement and the subsidence mechanism of the slope. The physical model test results are subsequently verified with 3-D discrete element numerical modelling. Due to the presence of the predominant joints, the observed well-shaped strata subsidence in Yanqianshan iron mine was successfully reproduced in the 3-D physical model. The failure mechanism of rock slopes differs from the trumpet-shaped subsidence observed in unconsolidated soil. Due to the formation of an arching mechanism within the rock mass, the strata deformation transferred gradually from the roof of the goaf to the slope surface.

Keywords

• physical modelling test
• rock structure
• fracture
• deformation
• mining