Reliability Analysis of Degraded Suspenders of Long-Span Suspension Bridge under Traffic Flow Braking

Abstract

The suspender is a crucial and vulnerable component of large-span cable bridges, and its service performance inevitably degrades under environmentally corrosive media and traffic load. The long loading area of a large-span bridge provides the possibility for continuous traffic flow braking on the bridge. This study proposes a continuous braking model of traffic flow based on the driver’s emergency braking reaction time and a steel wire degradation model considering the stress distribution characteristics of steel wire bending in the cross-section to analyze the safety of degraded cable components. The degradation process and bearing capacity variation of the cable are accurately quantified, and the reliability of the degraded cable under the action of traffic flow braking is determined. The results show that the traffic flow braking action causes a remarkable bending stress response in the bridge cable that reaches 450 MPa, which is much larger than the normal acting time. Moreover, differences in the bending stress of the cross-sectional steel wire cause significant differences in the fatigue process of the steel wire in different layers of the suspender. The outermost steel wires begin to fail after 12 years, and their service life is considerably different from that of the interlayer wires. The severely degraded steel wires on the outside can easily break under the traffic flow braking action, but they have no noticeable effect on the suspender’s ultimate bearing capacity because of the Daniels effect. The increase in the cable force caused by traffic flow braking and the stress redistribution after the steel wires break have the most evident influence on the reliability of the structure. Due to the effects of traffic flow braking, the timing of suspender maintenance is advanced by 8 years.

Keywords

• suspender
• traffic flow
• braking
• bending stress
• bearing capacity