Factors Affecting the Chipping Operation Based on the Screen Size of the Drum Chipper

Abstract

Forest biomass has recently been highlighted as a renewable energy source in South Korea. As the Renewable Energy Certificate weight has been revised to encourage the use of forest biomass for energy production, forest operations have focused on the development of new technologies and harvesting methods for the extraction and utilization of forest biomass. This study examined the application of a drum chipper to forest biomass and analyzed the effects of screen size (40, 50, 65, and 80 mm) on productivity, cost, and particle size distribution. When the screen size was 40 mm to 65 mm, the chipping productivity improved by up to 3.6 times, the fuel consumption decreased by up to 29.7%, and the chipping cost was reduced by up to 31.9%. The fines content tended to decrease with an increase in screen size. The size of woodchips was less than 100 mm in length and ranged from 10 to 63 mm. The 65 mm screen was the most effective (e.g., producing optimal wood chip size at an acceptable production rate) for the chipping operation. Harvesting methods and drying time are also important factors that determine the utilization efficiency of forest biomass. Therefore, further research should be focused on the effect of moisture content on chipping productivity, power required, and fine particle size in forest biomass productions.

Keywords

• productivity and cost
• fuel consumption
• screen size
• particle size distribution
• biomass utilization