Influence of the Catalyst Support on the Steam Reforming Performance of Toluene as Tar Model Compound

Abstract

The large amount of tar produced along with the syngas during biomass gasification is one of the major obstacle for the diffusion of gasifiers at industrial scale. Catalytic cracking and reforming are the most suitable processes for the transformation of tar into lighter gases. The selection of suitable catalysts is a critical step. The catalysts must own high activity and high resistance to deactivation for coke deposition. In this work the effect of two different supports, mayenite and aluminium oxide, on the activity of the nickel was investigated in the steam reforming of toluene that was used as tar model compound. In particular, the performed experimentations aimed to test the mayenite in terms of improvement of resistance to carbon deposition in conditions similar to those of gasification reactors. The obtained results indicate that Ni /mayenite catalyst needs higher temperature to activate and leads to lower value of toluene conversion with respect to Ni / alumina. However, mayenite, which is known from literature to have higher resistance to coke deposition due to the presence of free oxygens in the lattice which oxidize the coke deposited on the catalyst surface showed higher resistance to deactivation especially for low steam to carbon ratios.