Measurement and Analysis of Local Average Power According to Averaging Length Changes of 3, 6, 10, and 17 GHz in an Indoor Corridor Environment

Abstract

This study measures and analyzes the local average power for line-of-sight (LOS) and non-line-of-sight (NLOS) paths according to the averaging length in an indoor corridor environment. The indoor corridor comprises multiple offices, laboratory spaces, and lecture rooms. We selected 3, 6, 10, and 17 GHz measurement frequency bands. The measurement system consists of a signal generator, a low-noise amplifier, transmission and receiving antenna, and spectrum analyzer. To obtain an accurate prediction model of propagation due to the multipath effect, we determined the measurement method based on the measurement interval and number of measurements according to changes in the averaging length. 2, 4, 6, 8, and 10 lambdas (λ) were selected for the number of measurements by frequency, and 1.5 cm was set as the measurement interval. We used the close-in (CI) path loss model for the analysis according to changes in the averaging length. The coefficient of determination (R-squared) was applied using a linear regression equation to verify the measurement accuracy. Based on parameter n of the CI path loss model, no large differences were observed in the averaging length at each measurement frequency. However, at 2λ, owing to the multipath effect, R-squared was approximately 0.4–0.7 for the LOS path and 0.6–0.8 for the NLOS path. At 10λ, R-squared was approximately 0.7–0.8 for the LOS path and 0.8–0.9 for the NLOS path. This indicated that as the number of measurements increased by increasing the averaging length, the accuracy of the measurement results improved. The study findings will help determine an optimal averaging length, thus ensuring reliable indoor propagation measurement and contributing to the ITU-R standard.