Technologies (Aug 2022)
An Automatic, Contactless, High-Precision, High-Speed Measurement System to Provide In-Line, As-Molded Three-Dimensional Measurements of a Curved-Shape Injection-Molded Part
Abstract
In the manufacturing of injection-molded plastic parts, it is essential to perform a non-destructive (and, in some applications, contactless) three-dimensional measurement and surface inspection of the injection-molded part to monitor the part quality. The measurement method depends strongly on the shape and the optical properties of the part. In this study, a high-precision (±5 µm) and high-speed system (total of 24 s for a complete part dimensional measurement) was developed to measure the dimensions of a piano-black injection-molded part. This measurement should be done in real time and close to the part’s production time to evaluate the quality of the produced parts for future online, closed-loop, and predictive quality control. Therefore, a novel contactless, three-dimensional measurement system using a multicolor confocal sensor was designed and manufactured, taking into account the nominal curved shape and the glossy black surface properties of the part. This system includes one linear and one cylindrical moving axis, as well as one confocal optical sensor for radial R-direction measurements. A 6 DOF (degrees of freedom) robot handles the part between the injection molding machine and the measurement system. An IPC coordinates the communications and system movements over the OPC UA communication network protocol. For validation, several repeatability tests were performed at various speeds and directions. The results were compared using signal similarity methods, such as MSE, SSID, and RMS difference. The repeatability of the system in all directions was found to be in the range of ±5 µm for the desired speed range (less than 60 mm/s–60 degrees/s). However, the error increases up to ±10 µm due to the fixture and the suction force effect.
Keywords
