Influence of Particulate Reinforcement and Equal-Channel Angular Pressing on Fatigue Crack Growth of an Aluminum Alloy

Abstract

The fatigue crack growth behavior of unreinforced and particulate reinforced Al 2017 alloy, manufactured by powder metallurgy and additional equal-channel angular pressing (ECAP), is investigated. The reinforcement was done with 5 vol % Al2O3 particles with a size fraction of 0.2–2 µm. Our study presents the characterization of these materials by electron microscopy, tensile testing, and fatigue crack growth measurements. Whereas particulate reinforcement leads to a drastic decrease of the grain size, the influence of ECAP processing on the grain size is minor. Both reinforced conditions, with and without additional ECAP processing, exhibit reduced fatigue crack growth thresholds as compared to the matrix material. These results can be ascribed to the well-known effect of the grain size on the crack growth, since crack deflection and closure are directly affected. Despite their small grain size, the thresholds of both reinforced conditions depend strongly on the load ratio: tests at high load ratios reduce the fatigue threshold significantly. It is suggested that the strength of the particle-matrix-interface becomes the critical factor here and that the particle fracture at the interfaces dominates the failure behavior.

Keywords

• Al 2017 alloy
• Al2O3 particulate reinforcement
• fatigue crack growth
• equal-channel angular pressing (ECAP)