Compaction characteristics and mechanism of the ADC12 alloy powder by laser impact compaction

Abstract

This paper focuses on the dynamic compaction experimental investigation of ADC12 alloy powder using laser impact, leveraging the high strain rate and controllable precision of pulsed lasers. The effects of varying laser energy (Em) and impactor thickness on the relative density, microstructure, and microhardness of the ADC12 alloy powder billets were examined. Utilizing 2D multi-particle finite element simulation (2D MPFEM), the densification mechanism of these billets was analysed with the help of coordination numbers. The simulation also provided insights into the particle velocity, equivalent plastic strain, and adiabatic temperature increase during compaction. Key findings include that a relative densification of up to 97.27% in the billets is achievable when the laser energy reaches 6J. Notably, a decrease in impactor thickness at constant laser energy leads to a more uniform microstructure and microhardness in the billet. Simulations with the 2D MPFEM demonstrate that thinner impactors allow billets to absorb more energy, thereby increasing particle velocity and plastic strain. This enhances both the relative density and mechanical properties of the billets. The simulation explores the stress distribution during compaction and captures the adiabatic temperature rise on the surface of the pressed billet that occurs in the transient, which is consistent with experimental revelations that heat softens or even locally melts the particles to produce sintering. This study offers new insights into the formation process of these billets from a microstructural standpoint, elucidating the relationship between processing conditions and the resulting material properties.

Keywords

• Dynamic compaction
• Laser impact
• ADC12 alloy powder
• 2D MPFEM