Novel Drone Design Using an Optimization Software with 3D Model, Simulation, and Fabrication in Drone Systems Research

Abstract

This paper presents the design of a small size Unmanned Aerial Vehicle (UAV) using the 3DEXPERIENCE software. The process of designing the frame parts involves many methods to ensure the parts can meet the requirements while conforming to safety and industry standards. The design steps start with the selection of materials that can be used for the drone, which are polylactic acid (PLA), acrylonitrile styrene acrylate (ASA), and acrylonitrile butadiene styrene (ABS). The drone frame consists of four main parts, which are the center top cover (50 g), the side top cover (10 g), the middle cover (30 g), and the drone’s arm (80 g). A simulation was carried out to determine the stress, displacement, and weight of the drone’s parts. Additionally, a trade-off study was conducted to finalize the shapes of the parts and the various inputs based on their priorities. The outcome of this new design can be represented in design concepts, which involve the use of the snap hook function to assemble two body parts together, namely the middle cover and the center top cover, without the need of an additional fastener.

Keywords

• UAV
• polylactic acid
• acrylonitrile styrene acrylate
• acrylonitrile butadiene styrene
• trade-off study