Finite Element Method Assisted Audible Noise Detection for Overhead Line Conductors Using the Cage Experiment

Abstract

Audible noise (AN) has been the main concern in recent years when considering electromagnetic environmental impact in designing overhead lines (OHLs). Driven by the increased demand of high voltage direct current (HVDC) transmission lines, a novel corona cage experiment is built in association with an acoustic simulation using the finite element method (FEM). The characteristics of the acoustic wave propagation within the testing hall are analyzed using FEM, and the optimized locations for AN detection are determined. On the basis of complying with measurement standards, the location of the measurement is selected to be closer to the sound source and further away from the reflecting surface, to generate more accurate measurement results. In the designated test hall for this paper, the influence of refraction and reflection of sound waves is not obvious. The attenuation of sound waves below 4 kHz is negligible, while for higher frequencies such as 4 kHz and 8 kHz it is significant. Finally, FEM simulation is used to optimize the location for measurement microphones, and further experiments are carried out to verify its accuracy.

Keywords

• audible noise
• corona cage
• HVDC transmission lines
• time-domain measurement
• sound field simulation
• finite element method