Applied Sciences (Aug 2022)
Optimization Design and Analysis of Bionic Friction Reducing Nozzle in Oil Shale High-Pressure Jet Mining
Abstract
The borehole hydraulic mining method has unique advantages for underground oil shale exploitation. Breaking rock with a high-pressure water jet is a crucial step to ensure the smooth implementation of borehole hydraulic mining in oil shale. The hydraulic performance of the nozzle determines the efficiency and quality of high-pressure water jet technology. To obtain a superior hydraulic performance nozzle, based on the bionic non-smooth theory, a circular groove was selected as the bionic unit to design a bionic straight cone nozzle. The structural parameters of the circular groove include the groove depth, width, and slot pitch. The optimization objective was to minimize the pressure drop, where the fluid has the least resistance. A genetic algorithm was used to optimize the structural parameters of the circular grooves in the inlet and outlet sections of the bionic straight cone nozzle. The optimal structural parameters of the nozzle were as follows: the inlet diameter was 15 mm, the inlet length was 20 mm, the outlet diameter was 4 mm, the length-to-diameter ratio was 3, and the contraction angle was 30°. In addition, in the inlet section, the groove width, slot pitch, and groove depth were 3.9 mm, 5.2 mm, and 5.5 mm, respectively, and the number of circular grooves was 2. Moreover, in the outlet section, the groove width, slot pitch, and groove depth were 2.25 mm, 3 mm, and 5.5 mm, respectively, and the number of circular grooves was 2. The CFD numerical simulation results showed that under the same numerical simulation conditions, compared with the conventional straight cone nozzle, the bionic straight cone nozzle velocity increase rate could reach 13.45%. The research results can provide scientific and valuable references for borehole hydraulic mining of high-pressure water jets in oil shale drilling.
Keywords