Applied Sciences (Nov 2024)
A Correlation Relating the Residual Strength Parameters to the Proportions of Clay Fractions and Plasticity Characteristics of Overburden Sediments from the Open-Pit Mine Drmno
Abstract
One of the prerequisites for the safe exploitation of surface mines is the stability of the working and final slopes of the mine. In order to ensure this, it is necessary to carry out detailed field and laboratory geomechanical tests of the soil and, based on the obtained results, make calculations related to stability analyses. The results obtained in this way are used for dimensioning the slope of exploitation slopes (excavation). Landslides occur when the ultimate shear strength is reached, and therefore, the adequate definition of shear strength parameters is one of the essential prerequisites for successfully solving the stability problem. Unlike earlier tests in Serbia, when the residual shear strength parameters were determined based on the usual conventional methods (direct shear apparatus, triaxial apparatus), this time, in addition to the direct shear apparatus, a ring shear apparatus was also chosen for testing. The paper shows the method of determining the residual shear strength parameters of high plasticity gray clays and siltstones of roof sediments from open pit mine Drmno, using direct and ring shear apparatus. The results show that the residual angle of internal friction for gray clays obtained with the ring shear apparatus is 9.9–10.8°, and for the siltstone, it is 11.8–12.9°, both of which are lower than the values obtained with the direct shear apparatus. In addition, correlations between the residual parameters of soil shear resistance and some physical indicators (plasticity index, clay content) are provided, showing high correlation coefficients. The proposed correlations should be used only when time and financial constraints prevent the execution of actual tests to determine residual shear strength, as concrete experimental procedures provide a much more reliable assessment of the residual strength properties of the soil.
Keywords
