Synthesis and Performance Evaluation of a Novel Heat and Salt-Resistant Gel Plugging Agent

Abstract

Tahe oil field is a typical fissure cave carbonate reservoir with a temperature of up to 120~140 °C and a total salinity of formation water of (20~25) × 104 mg/L. In this paper, AM/AMPS was selected as the polymer, 1, 5-dihydroxy naphthol as the cross-linking agent, and polypropylene fiber as the system stabilizer to synthesize a novel gel plugging agent independently; the gel has good thermal stability at a high temperature of 130 °C and increased salinity of 20 × 104 mg/L, and has a dense and relatively stable three-dimensional network structure under a scanning electron microscope. The performance evaluation of the gel plugging agent indicated that: the gel dehydration rate increased gradually with the increase in temperature and salinity, making it suitable for reservoirs with temperatures below 140 °C and formation water salinity below 250,000 mg/L; the viscosity of the gel bulk was 125.3 mPa∙s, the post-gelatinizing viscosity was 42,800 mPa∙s, and the gelatinizing time at 120 °C, 130 °C and 140 °C was 10–20 h, 8–18 h, and 7–16 h, respectively.

Keywords

• high-temperature and high-salinity reservoir
• naphthol gel plugging agent
• performance evaluation