Real-Time Implementation of Sensorless DTC-SVM Applied to 4WDEV Using the MRAS Estimator

Abstract

This article presents the DTC-SVM approach for controlling a sensorless speed induction motor. To implement this approach, a practical prototype is built using a microcontroller, an embedded GPS module, and a memory card to collect real-time data during the driving route, such as road geographical data, speed, and time. These data are then utilized in the laboratory to implement the control law (DTC-SVM) on the electric vehicle. The d-q model of the induction motor is first presented to explain the requirements for calculating the rotor speed. Then, an adaptive model reference system speed estimator is developed based on the rotor flux, along with a controller and DTC-SVM strategy, which are implemented using the dSpace 1104 board to achieve the desired performance. The simulation results demonstrate satisfactory speed regulation with the proposed system. In this study too, an electronic differential system is modeled for the four wheels of an electric vehicle equipped with an integrated motor, all controlled by the DTC-SVM strategy. Vehicle speed and electrical vehicle steering angle variations, as well as wheel speeds estimated by code system, are verified using MATLAB/Simulink simulations.

Keywords

• DTC-SVM
• sensorless speed
• induction motor
• adaptive model reference system
• Dspace1104
• electronic differential system