Particles (Oct 2023)

Development of a Combined Horizontal and Vertical Correcting Magnet for Siam Photon Source II

  • Supachai Prawanta,
  • Prapaiwan Sunwong,
  • Pariwat Singthong,
  • Thongchai Leetha,
  • Pajeeraphorn Numanoy,
  • Warissara Tangyotkhajorn,
  • Apichai Kwankasem,
  • Visitchai Sooksrimuang,
  • Sukho Kongtawong,
  • Supat Klinkiew

DOI
https://doi.org/10.3390/particles6040058
Journal volume & issue
Vol. 6, no. 4
pp. 898 – 912

Abstract

Read online

A prototype of a combined horizontal and vertical correcting magnet was designed and fabricated for the 3 GeV storage ring of Siam Photon Source II, which will be the second synchrotron light source in Thailand. The magnet will be employed for fast-orbit feedback correction, with a required magnetic field integral of approximately 8 Tesla.mm. The magnet pole and yoke were manufactured using laminated silicon steel to minimize hysteresis and eddy current losses during operation. Magnet modeling and magnetic field calculations were performed using Opera-3D. The size of the gap between the magnet poles is limited by the size of the vacuum chamber over which the magnet will be installed; in this case, it was designed to be 65 mm. Mechanical analysis of the structure of the magnet was performed using SOLIDWORKS and ANSYS. Magnetic field measurements were obtained using the Hall probe technique. The entire prototype, from its design to manufacturing and measurement, was completed in-house. This design will be appropriate for application at the Siam Photon Source II storage ring.

Keywords