Numerical Study on the Influence of Aquitard Layer Distribution and Permeability Parameters on Foundation Pit Dewatering

Abstract

Evaluating the influence of geologic features on dewatering efficiency, particularly within strata of varying permeability, is critical to optimizing dewatering designs for deep excavations. In river valley areas, river sedimentation results in a discontinuous distribution of relatively aquitard layers (clay layers). The evaluation and calculation of the distribution and permeability parameters for foundation pit dewatering are very important when on-site geological data are insufficient. For this purpose, the deep excavation pit on the right bank and floodplain of Chongjiang River is taken as an example in this article. A three-dimensional groundwater flow model was constructed using the Unstructured Grid (MODFLOW-USG) software package version 1. The model was carefully calibrated using hydrogeologic features and observed groundwater levels to ensure its reliability. The simulation results effectively reproduce actual dewatering processes. The study reveals the following findings: (1) Increased aquitard layers (clay layer) enhance the barrier effect, thereby improving dewatering efficiency. (2) Increased clay layer permeability and storage coefficients reduce dewatering efficiency, while the specific yield of the clay layer has less pronounced effects. (3) Due to the discontinuous nature of the clay layer, dewatering rates are higher when the clay layer is below the riverbed than when it is in the flow boundary area (foothills).

Keywords

• deep excavation dewatering
• clay layer
• unstructured grid
• MODPATH